High Speed Production

Welding of 60 to 70 Nuts per Minute is possible with one machine and one operator

Operator safety

No need for operator to put nut between electrodes and as such no possibility of accidental injury to the operator

Right placement

Nut is placed with right orientation every time. Thus savings from probable damaged parts, damage to electrodes

No Wastage

Nuts do not fall down on shop floor, saving the material wastage

Easy to setup

Takes only a few hours for installation and is productionized on same day

Auto/Manual functions

Facilitates welding of different nuts by switching of nut feeder and can operate only spot welder

Auto switch off for vibrator

Saves power by switching off the vibrator when the supply hose is full



Operating Voltage

415V AC

Supply Frequency

50 Hz

Air Supply

4.5 to 5 bar

Bowl capacity

Around 10,000 Nuts

Feed rate

60-70 Nuts per Minute for M6
50-60 Nuts per Minute for M10

close slider



Click here to chat on WhatsApp.