NAVAIR Wooden Flush doors are consisted of core with low density wood perimeter system in the form of stiles and rails was adder that held the blocks in place provide screw-holding power from edge. A ply woods placed over the entire core and edge to create and engineer door.
More Info
Another feature is replacement to the stave core and an ultra-low density particle board core. It is more reliable and stable. Our flush doors are fashioned around a core, resulting in less sound transmission and improved over all mechanical & physical properties. Unlike other door systems, wood flush door arrive at the job site ready to hand.
“DOOR COLLECTION IS VERY HIGH QUALITY & HAVE A GOOD FINISHING”
Specification Sheet
- Application Passage Door
- Door Width Up to 1200mm
- Door Height Up to 2400mm
- Door Thickness 30mm, 32mm, 35mm, 38mm, 42mm, 45mm
- Face Plywood : 3mm thick-Grade-MR, BWR
Veneer : 3mm thick-Natural & Recon
Laminate : 0.8mm & 1mm thick
- Available Cores Hardwood, Pine Wood, Softwood
- Adhesive Fevicol (D3)
- Stiles 55mm wide-soid, two piece or securely bonded to the core
- Rail 55mm wide-solid tree piece or securely bonded to the core
- Lipping As per requirement
- Finishing Options Both Pain and Stain available
- Surface Both Smooth & Textured available
- Machining Complete factory machining available
* Particle Board Infill : Only Available in 35 & 38 mm thick Doors
