M90 MAG Tube-sheet Welding Head
M90 MAG Tube-sheet Welding Head
1st no-twist wire feeding for MAG tube to tube-sheet welding Auto High efficiency.
Brief
This is a specially designed automatic MAG tube to tube-sheet welding system for engineering machinery sleeve. It is fixed by positioner, 3D manipulator or intelligent spring balancer, wide range of localization. It is the first no-twist design for MAG tube to tube-sheet system, smooth in wire feeding, convenient and fast. Application: Boiler, engineering machinery, and so on.
Features
- Suitable for engineering machinery sleeve welding, boiler tube to tube-sheet and boiler pull bar MAG welding
- Localizer for wide range positioning
- No-wire-twist design and special wire feeding design to meet complex single-or multi-layer welding requirements
- Auto swing during welding
- Pneumatic locking on manipulator for up/down and left/right moving
- 15~20KG wire feeding plate, wire diameter:φ1.0 &φ1.2
Specifications
|
Material
|
Carbon steel
|
|
Tube OD(mm)
|
Φ38 ~ Φ260
|
|
Rotation speed(rpm)
|
0.23～4.6
|
|
Torch Angle
|
0°~60°
|
|
Protective Gas
|
Ar
|
|
Cooling
|
Water
|
|
Cooling Flow(ml/min)
|
≥600
|
|
Duty cycle
|
320A 60%
|
|
OSC Width(mm)
|
40
|
|
Manual Adjusting Height (up & down) (mm)
|
40
|
|
Wire Diameter(mm)
|
Φ1.0, Φ1.2(standard)
|
|
Weight(kg)
|
15(no cable)
|
|
Dimension(mm)
|
700×250×240
|
