MIG Track Narrow Gap Welding Heads
MIG Track Narrow Gap Welding Heads
Thick-wall tube welding expert in energy industry-welding head Suitable for thick-wall narrow groove welding, with wire swinging.
Brief
This system is made up of a narrow groove MIG welding head, manipulator, positioner and MIG Programmable orbital welding power Source, controlled by PLC.
This system is suitable to bevel depth of 250mm narrow groove welding(width 9~12mm, inclined 1/100~2/100 I bevel), make both bevel sides penetrated by wave wire.
Application: Thermal power, valve, coal mine machinery, engineering machinery, boiler and so on.
Features
- Suitable for bevel width less than 9mm narrow bevel welding
- Make both sides completely welding by moving of tungsten
- High deposition efficiency, low heat input
- Welding method: Horizontal, vertical and orbital welding
- Special multi-channel water cooling, high duty cycle
- Double gas protection, ensure weld quality
- Suitable for carbon steel, stainless steel.
Specification
Bevel Type | U, J type |
Tube Thickness (mm) | 30-250 |
Bevel Width (mm) | 9-20 |
Max Current (A) | 350 |
Max Wire Feeding Speed(mm/min) | 240000 |
Wire Diameter (mm) | ¢1.0, ¢1.2 |
Protective Gas | Mixed gas |
Cooling | Water |
Weight (kg) | 5 |
Dimension(mm) | 320*200*600 |