Water proofing

PU Waterstop 1K

Single Component Polyurethane based injection foam for water leakage

Single component solvent free Polyurathane based injection foam for stopping water from negative side.

A Polyurethane injection grout used as a waterstop system producing a relatively stiff polyurethane foam. This system only reacts when comes in contact with water to form a non-water soluble foam.

USES

Used to stop medium water penetration and to seal the crack or joint.

Sealcrete

Acrylic based Polymer modified cementitious composite coating

USES

  • Combines a tough, hard-wearing surface with waterproofing
  • Prevents peeling and blister formation.
  • Not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalies.
  • Non-flammable and does not give off toxic gases, when exposed to fire.

K10 Polyurea 550

Cold-applied hybrid polyurea waterproofing membrane

 

USES

  • Waterproofing of concrete structures, underground structures, roof, terraces, podiums, car parks deck, reservoir and dams, etc.
  • Waterproofing of water tanks.
  • Waterproofing of secondary containments.
  • Spot repair of hot applied polyurea membranes.

K11 Superflex

Davco K11 Superflex is a dual component resilient hydraulic micro mortar used for protection and waterproofing

PU Waterstop

PU WaterstopA modified solvent free di isocyanate (MDI) resin and a specified catalyst

A modified solvent free di isocyanate (MDI) resin and a specified catalyst.

Davco 721 PU

Davco 721 PU is a two component solvent free, polyurethane system consisting of a resin component and a special type of isocyanate. This system is ideally suitable for the elastic sealing of cracks in concrete structures as well as areas suffering from water leakage problems.

Davco K10 Sovacryl

Davco K10 Sovacryl is a premixed flexible acrylic waterproofing membrane that can be applied directly from the container.

Davco K10 Dampflex

Davco K10 Dampflex is a polyurethane modified concealed waterproofing and sealing membrane, ready to use from the container.

Davco K10 Polyurethane Plus

Davco K10 Polyurethane Plus is a flexible single pack water-based polyurethane waterproofing and sealing membrane.

Davco K10 GRS 2000 SF

Davco K10 GRS 2000 SF is a liquid applied two component, seamless, solvent free polyurethane elastomeric underlayment coating developed for use in roof gardens.

Davco K11 CWA (Crystalline Waterproofing Admixture)

DAVCO K11 CWA (Crystalline, Waterproofing Admixture) is a special cementitious mix of active chemicals that readily reacts with moisture in the concrete to form crystalline structures within the pores and capillary tracts of the concrete.

Davco K11 Matryx

Davco K11 Matryx is a cementitious waterproofing system which protects and waterproof concrete structures by crystallisation.

Davco K11 Rapid Plug

Davco K11 Rapid Plug is a series of ultra-fast setting hydraulic mortars which offer immediate and long-term protection against water leakage.

Davco K11 Flex

Davco K11 Flex is a flexible 2-part polymer-modified cementitious waterproofing system.

Basement

pageimage.img.400

Hidden from sight, the below grade portion of a building typically serves some essential function.

Parking, garages, some non-critical storage and laundry area are commonly placed underground. Here the waterproofing requirement is not very strict.

However, for important function rooms, storage and technical areas like offices, high-end moisture-free data storage centres filled with high-tech equipment; any of these services may be located below grade in buildings.

In many countries, it is important to have special rooms in Basement in case of unfortunate circumstances like war, earthquake, etc.

Containment Waterproofing

pageimage.img.400 (1)

Retention Pools / Tanks of Sewage Waters / Chemicals Effluents require protection of the subsoil and groundwater against pollution.

Following the specific requirements Sika®WP Shield Sheet Membranes, SikaTop®Seal Liquid Membranes or Sikagard®Epoxy Coatings would be beneficial.

Wet Rooms

pageimage.img.400 (2)

Wet Rooms have to withstand highest requirements.

Sika offers a full range of cementitious, acrylic & polyurethane waterproofing solutions for use under protective coats.

Joint sealing products like sealing tapes, tile grouts as well as silicones round the wet room system off and meet highest standards.

Podium & Terrace

pageimage.img.400 (3)

Waterproofing System & Membrane Solution for the protection of Roof Deck.

Tunnels

pageimage.img.400 (4)

Tunnel seal is used for protecting the construction of tunnels against damage resulting in moisture or unintentional entry of water.

It also protects against the danger posed by aggressive water / soils & the effects of chemicals.

Joints

pageimage.img.400 (5)

All kind of concrete structure contains Construction Joints and very often Expansion Joints considering high movements.

Sika® Combiflex Adhesive Tapes, SikaSwell® Profiles & Sealants and SikaFuko® Injection Hose System allows the design of the correct and practical sealing solution for each and every type of joints in the structure.

Injection

pageimage.img.400 (6)

Sika Injection Systems are used in the Repair & Waterproofing of Concrete Structures like sealing of Cracks, waterproofing of Construction & Expansion Joints and repair of damaged membranes.

Bituminous Waterproof Coatings

Bituminous Waterproofing Service to Below ground structures, above ground structures, roof tops, Foundations, Basements, Retaining Walls, Water Tanks Sumps, Roof Slab Structures, Sunken, Water Retaining.

Structures:

  • Sewage Tank
  • Pile Cabs
  • Planter Boxes
  • Roof Gardens
  • Podiums
  • Subways
  • Bridges
  • Tunnels
  • Canal
  • Dams And Reservoirs

Baked Bituminous Emulsion

We are rendering an attractive range of Baked Bituminous Waterproofing Service. These services are rendered using only high-quality components. Apart from this, our patron can avail these waterproofing services in different plans. Water proofing to Below ground structures, above ground structures, roof tops, Foundations, Basements, Retaining Walls, Water Tanks Sumps, Roof Slab Structures, Sunken, Water Retaining.

Structures:

  • Sewage Tank
  • Pile Cabs
  • Planter Boxes
  • Roof Gardens
  • Podiums
  • Subways
  • Bridges
  • Tunnels
  • Canal
  • Dams And Reservoirs

Crystaline Waterproofing System

With rich industry experience, we are offering a large collection of Crystalline Waterproofing System to our valued clients. We are offering these waterproofing services in different options to suit the varied needs of our clients. Also, these are offered at very reasonable rates. Water proofing to Below ground structures, above ground structures, roof tops, Foundations, Basements, Retaining Walls, Water Tanks Sumps, Roof Slab Structures, Sunken, Water Retaining.

Structures:

  • Sewage Tank
  • Pile Cabs
  • Planter Boxes
  • Roof Gardens
  • Podiums
  • Subways
  • Bridges
  • Tunnels
  • Canal
  • Dams And Reservoirs

Acrylic Polymer Water Proofing

With the help of adroit team, we present an extensive series of Acrylic Polymer Coating Service Our products are available in varied specifications that meet on consumer’s demand.
Acrylic waterproof membrane coating1. High quality water proof membrane coating -neoproof rc 2002. Elastomeric acrylic water proof coating neoproof rc 203

Blind Salt Mineral Water Proofing

Blind Salt Mineral Waterproofing Service to Below ground structures, above ground structures, roof tops, Foundations, Basements, Retaining Walls, Water Tanks Sumps, Roof Slab Structures, Sunken, Water Retaining.

Structures:

  • Sewage Tank
  • Pile Cabs
  • Planter Boxes
  • Roof Gardens
  • Podiums
  • Subways
  • Bridges
  • Tunnels
  • Canal
  • Dams And Reservoirs

Pu Membrane Water Proofing

A modified solvent free di isocyanate (MDI) resin and a specified catalyst.

Enquiry
close slider

×

Hello!

Click here to chat on WhatsApp.

×